皇冠骰宝

News Center

What are the installation environment requirements for the step star reducer?

2020-09-22 16:24:00

Through the recent investigation and return visit to customers, we found that many customers do not understand the difference between stepper motor and servo motor. We hope the manufacturer can further explain. Today, I'll share the relevant information with you, hoping to inspire and help you. Many new users generally believe that as long as you follow the correct installation steps, you can install Stepping star reducer Smooth start-up and use, but in fact, the correct installation of the reducer is far from enough, it also needs to be installed in the environment to meet the installation requirements, so as to really ensure the installation quality of the reducer. For example:
1. Step star reducer should be installed on the horizontal plane with an inclination of no more than 10 ° in general. If the gradient is greater than 10 ° due to special needs, please contact the company before use to discuss relevant matters.
2. The installation foundation shall be firm and reliable without vibration and looseness. The fixing screws shall be selected in strict accordance with relevant standards and regulations.
3. The installation screw should be checked irregularly to see if it is tightened and fixed firmly, and the spring gasket should be selected as far as possible.
4. When the input shaft and output shaft are connected with the power and supporting machinery, if the coupling is used, the shaft and shaft shall be strictly aligned, and there shall be no concentric phenomenon. The triangular belt and chain shall not be too tight or too loose.

Zibo Guanyi Transmission Machinery Co., Ltd http://k-mart19.com/ Welcome to visit. for more information, please visit Baidu: Guanyi Micro DC motor , Guanyi High power DC motor , Guanyi Servo planetary reducer , Guanyi Stepping star reducer


All rights and interests of the company are owned by the company Lu ICP Bei No. 19002194   technical support: Zibo Oukai