皇冠骰宝

News Center

How to deal with the failure of gear running in of servo planetary reducer?

2019-10-24 11:14:00


It's very rare to find out Servo planetary deceleration machine The gear design is not reasonable, and once this happens, it will lead to the gear and other parts can not run in, resulting in the reducer can not run normally. So how to deal with this situation?
1. If the center distance of the two gears is slightly insufficient, the displacement can be considered to make up for it.
2. If it is a heavy-duty gear, in order to improve the stiffness of the gear teeth, it can be considered to use the pair displacement to improve.
3. In order to avoid undercutting, the positive displacement should be selected when the design of servo planetary reducer must be less than 17 teeth.
4. To meet some special requirements, such as increasing the coincidence degree of the servo planetary reducer, the displacement can be considered.
Sometimes, in order to meet the special working requirements, the servo planetary reducer will adjust its position. However, in the process of displacement, it must comply with the relevant deflection regulations before it can be carried out. Otherwise, setting the gear shift hastily will only cause damage to the reducer.


Zibo Guanyi Transmission Machinery Co., Ltd http://k-mart19.com/ Welcome to visit. for more information, please visit Baidu: Guanyi Micro DC motor , Guanyi High power DC motor , Guanyi Servo planetary reducer , Guanyi Stepping star reducer


Contact person: Zhai manager   mobile phone: 18678222209   address: nanyucheng Industrial Park, economic development zone, Boshan District, Zibo   all rights reserved   Zibo Guanyi Transmission Machinery Co., Ltd Lu ICP Bei No. 19002194   technical support: Zibo Oukai